Features and BenefitsUses all available fuel from the tank. No issues with sucking air when below 1/8th of a tank. Perfect for use with today’s high flow lift pump systems. (Airdog, FASS, etc)Sediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.Stainless Drain Plug for future tank servicing or sediment draining.Single bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.Stainless Steel hardware, High Flow aluminum Quick Disconnect/pushlock fittings, and a -8 ORB Plug are provided in the kit.Comes with 3 hole saw to make the only hole needed in your tank for install.Inner ring designed to go through the 3 hole so tank does not need to be dropped.O-ring design for a perfect seal.Super strong 1 piece machined billet design.Can be installed on any fuel tank with an available 4 diameter flat areaSupporting the Company that Invented the Single Hole Design Sump!Can be used on metal or plastic tanksWorks on gas or diesel applicationsDESIGNED AND MANUFACTURED AT OUR FACILITY, IN WOODBURY,TN USA!!!New and improved design! The Beans Diesel/Bean Machine Multi Function SumpWhat we have done at Beans Diesel/Bean Machine is stepupthe tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install.Just like ouroriginal and revolutionarydesign, install is as easy as it gets, requiring a single 3″ hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak.All of our tank sumps come with a 3″ hole saw, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. We manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. Our fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1/2″ push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! We even include a plug if you only need a single outlet style sump.We are not the only sump manufacturer on the market, but if you do purchase ours you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!Functions:Supply/Return.orSingle outlet setup.orFor your higherhorsepowertrucks, dual outlet to get the extra fuel needed.If you are looking to install a FASS fuel system, Air Dog fuel pump, or any other aftermarket fuel system, you will find through your research that many past and present customers are complaining of noise and quarter tank issues.Let’s cover the quarter tank issue first. These quarter tank problems are caused by the draw straw often supplied with these kits. A draw straw is a tube that is fed through the top of the fuel tank that attaches to the suction line going to your aftermarket fuel system. The draw straw is located wherever you drill the hole, but the only available spots to drill into your factory diesel fuel tank are flexible spots. So as you drive, the fuel tank is flexing. When you go around a sharp corner with a quarter tank of fuel, the draw straw can swing away from where gravity takes the fuel. This causes the fuel system to suck in air and acts like your truck is running out of fuel. The truck will die, but once you pull over and the fuel settles, the truck will start again. It’s not only annoying, but also dangerous because your power steering stops working when the engine shuts down, brakes also become sketchy. Noise is another common com