10 Tenth Premium 10W-60 (100% PAO & ESTER) – Penrite

• Base Oil:100% PAO ESTER Full Synthetic
• Viscosity:SAE 10W-60
• For Petrol / E10, Diesel, Racing, E85, LPG vehicles
• Key Specifications:API SN/CF, JASO MA2.

Premium 10is a 100%PAO&Estersynthetic,SAE10W-60, nonfriction modified,modernengine oil. It utilises premiumsynthetic base oilwith aFULL ZINC+(exceeding 1800+ppmlevels)additivepack for the ultimate in engine protection and performance.

FACTORYRACING

Penrite10 TenthsRacingproductsare used byFactory Race Teamsto provide the ultimate in performance and protection. To visit our Factory Racing Partners and Penrite Brand Ambassadors.

APPLICATION

Premium 10is suitable for use in modern 4, 6 & 8+ cylinder, multi cam, multi-valve including VVT, naturally aspirated,supercharged& turbocharged engines. It can be used in standard and high performance engines for both competition and normal on/off road use in a wide range of vehicles.

Premium 10is recommended for use in vehicles where SAE 10W-50 and SAE 15W-50 engine oils were originally recommended by the manufacturer.

Premium 10can be used whereACEAA3/B3is recommended in model years prior to 2017 and where ACEA A3/B4 is recommended in model years prior to 2008. It can also be used whereAPISNor previous API specificationsSM(2004-2010),SL(2001-2004), SJ (1998-2000) or earlier specifications are recommended. It is suitable for use inLPGandlight dutydieselengines whereAPI CFor ACEA A3/B3 is required prior to 2017 and where ACEA A3/B4 is recommended prior to 2008. It isNOTsuitable for use in diesels fitted with aDPF(Diesel Particulate Filter).

PENRITE TEN TENTHS

Premium 10has been proven in race and competition conditions in engines requiring a high performancefull syntheticengine oil. It is the product of choice for many competitors running competition vehicles in circuit & drag racing, rallying, drifting, hill climb, targa, time trials and regularity.

Premium 10is suitable for use infour strokemotorcycles with wet clutches.

VEHICLE &FUEL TYPES

Premium 10is suitable for use in passenger car, light commercial, competition vehicles and motor cycles and can be used with Petrol, LPG,E10,E85(Racing & Competition only), diesel (without DPF), avgas, nitro, methanol & otherconventionalfuels. It is also suitable for use in four stroke motorcycles with wet clutches and meetsJASO MArequirements.

IMPORTANT INFORMATION WHENCHANGING OIL.

Please Note:When changing oil, Penrite recommend usingPenrite Engine Flush, a fast acting,solventfree, engine cleaning formulation that removes engine deposits,sludgeand contaminants with the oil service drain. It contains added zinc for enginewearprotection and its fast acting formulation works in 10 minutes.

Please Note:A 58mm cap with pouringtapis available to fit 7, 10 & 20 litre packs.

• Blended using 100%PAO(Poly Alpha OlefinGroup IV) &ESTER(Group V)full syntheticbase oils for maximum heat resistance and high performance
• *FULL ZINC+anti-wearadditivepackage for ultimate engine wear protection
• MAXIMUMwear protection, minimumsludgeformation & reducedpiston deposits
• Competition proven and trusted for performance engines
• Longer enginelifeby reducing formation of hightemperatureengine deposits
• Reduced oilconsumptiondue to use of highly specialised, ultra-pure, low volatilitysynthetic base oils
• Non-friction modifiedso can be used in motorcycles with wet clutches
• Very fast flow at start-up combined with full-bodied high temperature protection